AT-G-Alert

Aquilar / AT-G-Alert

Refrigerant Leak Detection

Non-Aspirated Systems

AT G-ALERT
	Refrigerant gas leak detector for occupied spaces – available while stocks last Replaced by the AT-SRG sensor for refrigerant gas Fits in standard electrical boxes for easy installation. Low profile / flush mount for aesthetically non-intrusive appearance. Two relays and Modbus Communications for notifying building management & initiating counter measures. Alarm options (LED, buzzer, two levels, configurable delay and fail-safe) to alert occupants and remotely inform building management of alarm location for rapid response as required. Refrigerant specific sensors for enhanced safety. Self diagnostics and simple field calibration for easy maintenance. Unique plug-in field replaceable pre-calibrated sensor for low cost of ownership. Helps achieve BREEAM credits Pol 01 and Pol 02 , EN378, F-Gas and EH40 Health & Safety guidelines.	Click for Datasheet Click for Instruction sheet Click for Quick Start Guide Click for Information Bulletin

AT G-ALERT

Refrigerant gas leak detector for occupied spaces
– available while stocks last

Replaced by the AT-SRG sensor for refrigerant gas

Fits in standard electrical boxes for easy installation.
Low profile / flush mount for aesthetically non-intrusive appearance.
Two relays and Modbus Communications for notifying building management & initiating counter measures.
Alarm options (LED, buzzer, two levels, configurable delay and fail-safe) to alert occupants and remotely inform building management of alarm location for rapid response as required.
Refrigerant specific sensors for enhanced safety.
Self diagnostics and simple field calibration for easy maintenance.
Unique plug-in field replaceable pre-calibrated sensor for low cost of ownership.
Helps achieve BREEAM credits Pol 01 and Pol 02 , EN378, F-Gas and EH40 Health & Safety guidelines.

Click for Datasheet
Click for Instruction sheet
Click for Quick Start Guide
Click for Information Bulletin

The Aquitron AT-G-ALERT refrigerant gas detector is specifically designed to provide continuous monitoring for refrigerants associated with high-efficiency, high volume refrigerant cooling and heating systems, such as VRF/VRV (Variable Refrigerant Flow/Variable Refrigerant Volume) systems.

Using the AquiNet Fieldbus central monitoring system with the AT-G-ALERT refrigerant gas sensors enables designers and installers to comply with the requirements of BS EN378, providing a central audible and visual central alarm system.

Typical applications include hotel bedrooms, apartments, hospitals, schools and office buildings.

The AT-G-ALERT audible and visual alarms alert occupants and simultaneously communicate to Building Management Systems/Building Automation Systems (BMS/BAS) or AquiNet System. Two on-board relays can be used to close valves, activate alarm devices and exhaust fans or initiate emergency calls.

The on-board Modbus RTU interface provides real-time information about concentrations, status and settings. It also enables custom configuration of the AT-G-ALERT to any application specific requirements using multiple Modbus registers.

The AT-G-ALERT is designed for easy installation and simple maintenance.

AT-G-ALERT Surface Enclosure

AT-G-ALERT Recessed Unit with decorative faceplate