TT1000 Water Sensing Cable

• Detects the presence of water at any point along its length
• Distance measuring water leak detection sensor
• Small but rugged, TT1000 cable is extremely resistant to abrasion and corrosion
• Has a smooth design that dries quickly.
• Available in factory terminated lengths with pre installed connectors, 1, 3, 5, 7.5 and 15 metres
• Can be monitor by both the TraceTek digital pin point location system and the AquiTron zonal panels

TT1100-OHP and TT1100-THIN Water Sensing Cable

• Designed to attach to overhead pipes
• Distance measuring water leak detection sensor
• Detects the presence of water at any point along its length.
• Available in factory terminated lengths with pre installed connectors, 1, 3, 5, 7.5 and 15 metres
• Can be monitor by both the TraceTek digital pin point location system and the AquiTron zonal panels

EL-ECO-SC – EcoLeak Water Sensing Cable

• Detects the presence of water at any point along its length
• Small, flexible and rugged construction, easy installation
• Two sensing wires helically constructed using fluoropolymer conductive technology.
• Mechanically strong and resistant to abrasion and corrosion.
• Has a smooth design that dries and is reusable very quickly.
• Available in 1, 3, 5, 10, 15, 20, 25, 30 meter lengths with a pre-installed connector.
• 3 to 50 metres leader cables available with preinstalled connector.
• For use only with the EcoLeak series of panels.

TT3000 Aqueous Chemical Sensing Cable

• Designed to detect and withstand a wide range of chemicals such as Hydrochloric, Sulphuric acids, Methanol, de-ionized water, include
  radioactive liquids and many more
• A comprehensive chemical response chart is available
• This cable provides fast detection and is reusable
• Available in factory terminated lengths with pre installed connectors, 1, 3, 5, 7.5 and 15 metres
• Can withstand temperature up to 90 deg C

TT5000 Fuel Sensing Cable

• Detects the presence of liquid hydrocarbon fuels at any point along its length.
• Does not react to the presence of water. Can be used internally, externally and buried in the ground
• Available in factory terminated lengths with pre installed connectors, 1, 3, 5, 7.5 and 15 metres and in bulk reels up to 150 metres
• Can be used on Hazardous areas with ATEX certification

TT5000-HUV Fuel Sensing Cable

• Same specification as the TT5000 however fitted with an overbraid to protect the cable from ultra violet light when installed externally
• Detects a wide range of liquid hydrocarbon fuels and oils.
• Designer to be attached to the bottom of external pipe
• Detects the presence of liquid hydrocarbon fuels at any point along its length.
• Does not react to the presence of water.

TT5000-HS Fuel Sensing Cable

• Designer to be used within a slotted pvc conduit buried in the ground
• Detects the presence of liquid hydrocarbon fuels at any point along its length.
• Does not react to the presence of water.
• Designed to be used externally buried below ground along pipelines

TT5001 Sensing Cable

• Detects liquid organic solvents anywhere along its length
• Does not react to the presence of water

TT5001-HUV Solvent Sensing Cable

• Same specification as TT5001 however fitted with an overbraid to protect the cable from ultra violet light when installed externally
• Detects liquid organic solvents anywhere along its length
• Does not react to the presence of water

TT7000 Strong Acid Sensing Cable

• Detects leaks and spills of sulphuric and nitric acid at any point along the cable length.
• Available in factory terminated lengths with pre installed connectors, 1.5,
  3, 5, 7.5 and 15 metres and in bulk reels up to 300 metres
• For internal applications and can be externally buried below ground along pipelines
• Also available for external above ground applications with a ultra violet protective outer overbraid (TT7000-HUV)

AT-Probe Water Detection

• Floor or wall mounted suitable for many types of applications
• For plant rooms, bunds, drip-trays, gullies or gutters
• Use with any of the TraceTek and AquiTron™ alarm panels

EL-MPS-R Mini Probe (Water Sensing)

• Low point water leak detection probe.
• Compact size ideally suited for small shallow locations.
• Low profile design.
• Detection between 1.5 & 2mm depth of water (can be adjusted to 0.9mm).
• Dries quickly after been removed from water.
• AT-MPS for use only with AquiTron series of panels.
• AT-MPS-R for use only with EcoLeak series of panels.

AT-OPSEN Optical Oil Sensor

• Instant detection of fuel oils, chemicals and water, suitable for generator, oil storage and day storage tank rooms, plant areas, bunds, drip-trays and floor gullies
• Uses industry-proven optical sensor technology for accurate detection
• Use with any of the TraceTek and AquiTron™ alarm panels

AT-OPSEN-R Optical Oil Sensor

• This is an adaptation of the AT-OPSEN with the sensor element removed from the IP67 enclosure, enabling the sensor to be remotely mounted.
• Can be screwed into the bottom of pipe in pipe system
• Screwed into the side of a tank for high level indication

TT-FFS Fast Fuel Sensor

• Fast response to small amount of fuel
• Does not detect water
• Resets for multiple uses
• Detects fuel floating on water, spreading on a flat surface or collecting in a sump.
• SIL-2 Rated & ATEX system complaint

AT-DTP Drip Tray Probe Water Sensor

• Designs to hook over the size of a fan coil units and air conditioning unit drip trays to detect any water leaks
• Use with any of the TraceTek and AquiTron™ alarm panels
• Capable of detecting all conductive liquids (water, coolants, foul water)

AT-600A Immersion Probe Water Sensor

• Capable of detecting all conductive liquids (water, coolants, foul water)
• Can be screwed into the bottom of pipe in pipe system
• Can be fitted in an overflow pipe to detect the water
• Designed for use with all TraceTek and AquiTron™ alarm panels
• No separate power supply required

AT-TDWS Tundish Water Sensor

• Designed for placing horizontally or vertically within an open tundish
• Creates alarm when water flows past the end of the sensor tips
• Fully submersible. Dries in seconds
• Can be used with all AquiTron and TraceTek series of alarm units

AT-350A Toilet Overflow Sensor

• Designed to save water on overflowing toilets
• Specially designed to be fitted in to the top of a WC cistern overflow to alarm when water is overflowing
• Designed for use with all AquiTron™ alarm panels
• No separate power supply required