Master Alarm Panel
TTDM-128

• Monitors for water, fuel oil, chemical and refrigerant gas leaks in several different rooms and floors at any one time
• Locates a leak digitally to within 1 metre anywhere on the system
• Distance measuring leak detection system
• Simultaneously monitors up to 128 SIM controllers (slave units)
• Can detect multiple leaks or spreading leaks
• Areas and rooms are named to simplify leak locating (regions/tagging)

Master Alarm Panel
TT-TS12

• Digital and addressable leak detection system
• Monitors for water, fuel oil and chemical leaks in several different rooms and floors at any one time
• Pinpoint location of leak position to +/- 1 metre / 1 zone
• Distance measuring leak detection system
• Can detect multiple leaks or spreading leaks
• Suitable for use with all TraceTek sensing cables and AquiTron probes

System Interface Module (slave controller)
TTSIM-1

• Monitors all TraceTek sensing cables and AquiTron™ water, fuel oil and refrigerant gas sensors
• Distance measuring leak detection system
• Direct BMS interface using MODBUS, Opto-22, or Johnson Controls Metasys protocol
• Compact enclosure designed to be clipped directly into a controls cabinet
• Distance measuring leak detection system

System Interface Module (slave controller)
TTSIM-1A

• As for TT-SIM-1, but with a programmable volt free alarm relay output
• Can be connected directly to solenoid valves, pumps and external remote alarm devices
• Monitors all TraceTek sensing cables and AquiTron™ water, fuel oil and refrigerant gas sensors
• Distance measuring leak detection system

System Interface Module (slave controller)
TTSIM-2

• This is an enhanced TT-SIM-1A, with a LCD display to show the leak location in metres or feet
• Can be connected directly to solenoid valves, pumps and external remote alarm devices
• Monitors all TraceTek sensing cables and AquiTron™ water, fuel oil and refrigerant gas sensors

Addressable Pinpoint Alarm
AT-APA

• Detects a leak at any point on the sensing cable or probe circuit
• 4 independent sensing circuits (4 zones)
• Pinpoint meterage location
• Detects cable break faults
• 40 addressable regions
• 4 simultaneous leaks can be detected
• Touch-screen display
• Distance measuring leak detection system

Single Zone Alarm
AT-SZA

• For commercial / light industrial and environmental applications
• Monitors TraceTek sensing cables and AquiTron™ water, oil probes and refrigerant sensors
• Can connect to BMS, speech and auto diallers, pumps and solenoid valves for remote indication and isolation

Multi Zone Alarm
AT-ZAP

• The AquiTron Zone Alarm Panel is designed with multi zone flexibility in mind
• It offers an extensive level of user defined functionality, on a zone-by-zone basis for all 12 zones
• Touch screen graphical user interface, giving access to a range of live, real-time and historic sensor, monitoring and alarm event data
• Instant audible and visual (alarms shown on screen display) notification when a leak, spill or flood is detected

Multi Zone Alarm
AT-MZA panel

• For up to 8 individual sensing zones for multiple areas/floors
• Monitors TraceTek sensing cables and AquiTron™ sensor probes
• Alarm relay outputs can control individual air conditioning units, pumps and valves in separate zones

Eco-1 Single Zone Panel

• Low cost solution for residential and commercial applications
• Compact design suits installation in tea points, plant rooms, boiler rooms, bathrooms, kitchens, air conditioning/fan coil units, BMS and environmental monitoring control systems
• 100 to 240Vac operation
• For water, fuel oil, and chemicals using sensing cable or probes
• Available as a complete kit with ready made lengths of leader, water sensing cable or probe

Eco-6 Multi Zone Panel

• 6 zone leak detection panel with built in 24hr battery back-up
• Simultaneously detects leaks on all 6 zones
• Ideally suited for small areas within residential and small commercial applications
• Compact design suits installation in utility cupboards, plant and boiler rooms, bathrooms, kitchens and air conditioning/fan coil unit drip trays
• Individual leak and cable break LED display for each zone
• Remote connection to a BMS, auto dialler or home automation system
• 110 to 240Vac operation
• Suitable for detection of water, hydrocarbon fuels and chemicals using sensing cable or probes

AT-OSP Panel

• Instant detection of fuel oils, chemicals and water
• Applications include generator, oil storage and day storage tank rooms, plant areas, bunds, drip-trays and floor gullies
• Uses industry-proven optical sensor technology for quick and accurate detection
• Can be screwed into the bottom of pipe in pipe system (dual wall pipe or dual wall tank)
• Can be screwed into the side of a tank for high level indication

TTC-1

• Surface or Din rail mountable enclosure for installation in environmental monitoring control systems and air-conditioning / fan coil units, BMS
• 12/24V ac/dc operation
• ATEX and SIL2 certified
• Sensitivity and time delay function to prevent spurious alarms
• For water, fuel oil, chemical and refrigerant gas, using sensing cable or probes

Leak Detection Module AT-LDM

• Open chassis design suits installation in air conditioning/fan coil units, BMS and environmental monitoring control systems
• DIN Rail mounting
• 24 Volts AC/DC or 230Vac. (120Vac special order)
• For water, fuel oil, and chemicals using sensing cable or probes
• Open chassis version
• Capable of monitoring a combination of:
  • 45 metres of any TraceTek sensing cable
  • 5 detector probes / optical sensors / float switches / immersion sensors
• Status indicators, LED’s: power, communications, leak
• This module does not detect cable breaks
• Power 24 Volts AC/DC or 230Vac. (120Vac special order)
• Output communications:
  • leak volt free contacts (one set)
  • Audible alarm
• Remote connection to speech and auto diallers

TT-FLASHER-BE

• The TT-FLASHER-BE is an inexpensive, battery powered device that provides an easy-to-see flashing light signal whenever a TraceTek sensor cable or probe detects a leak
• No external zener safety barriers are required
• ATEX certified alarm indicator
• Can be used to monitor TT-FFS, TT5000, TT5001 and TT3000