AquiTron AT-G-ALERT-C Refrigerant Leak Monitor
The AT-G-ALERT-C Refrigerant Leak Monitor provides centralised monitoring and alarming for multi-occupant applications utilising the AT-G-ALERT Refrigerant Leak Detectors. The AT-G-ALERT-C continuously monitors all connected devices for alarm and fault conditions and will provide alerts via the integrated colour touchscreen and built-in relays.
Visual Status Indication: At a glance visualisation of whole system alarm, fault, or connectivity status
Integrates with Refrigerant Detectors: Centralised monitoring for multi-occupant applications utilising the AT-G-ALERT refrigerant detector
Continuous update: Continuously monitors all connected AT-G-ALERT detectors for alarm and fault conditions, ensuring and warning in case of any disconnect
Relay Outputs: 1 Alarm Relay; 1 Fault Relay; automatic system action to be taken for fault or alarm condition via built-in relays
Communication: Modbus TCP Master, 10/100 Ethernet, RJ45 Port
Event Log: Rolling event log of 100 most recent events (alarms, faults, connectivity, etc.) saved to SD card
Broad Network: Up to 100 devices connected into a single network, grouped into manageable blocks with up to 15 AT-G-ALERT refrigerant detectors per gateway
Device ID Auto-assign: Commissioning via dynamic device pairing and remote Modbus auto-assign save
Each AT-G-ALERT refrigerant gas sensor is monitored centrally for three different alarm conditions:
 |
Devices in Alarm screen will list a single Device/Room tile for each AT-G-ALERT in active alarm. Each tile will also indicate the severity status and network details for the AT-G-ALERT. |
 |
Devices in Fault screen will list the Floor/Room location, status, and network details for each AT-G-ALERT found to be in fault. |
 |
Comm. Error screen will list the Floor/Room location, status, and network details for each affected AT-G-ALERT. |
Example of a small network
Please refer to the AquiTron AT-G-ALERT-C Installation and Operation Instructions or contact our technical department for design and application support
Supporting products
 |
AT-G-ALERT Refrigerant gas leak detector for occupied spaces |
Click for Installation & Operation Instructions Click for Datasheet |
 |
Ethernet Network Switch An Ethernet network switch is used to provide connectivity between the AT-G-ALERT-C Controller and individual gateways. |
Click for Installation & Operation Instructions Click for Datasheet |
 |
Gateway A gateway is used to create small networks of AT-G-ALERT Refrigerant Leak Detectors (up to 15 per gateway) to ease installation and troubleshooting. |
Click for Installation & Operation Instructions Click for Datasheet |
 |
Modbus EZ-Wire Kit Perfectly sized and stripped, pre-bonded wire provides faster, more consistent installation to the AT-G-ALERT Modbus port. |
Click for Installation & Operation Instructions Click for Datasheet |