Containing expensive computers and machinery and often cooled with air conditioning or direct water cooling, a potential leak can cause extensive damage and disruption.
MRI Scanner Room
The Threat
The Solution
To install TT1000 leak detection cable around the perimeter of the room so that the presence of water can be detected immediately and damage can be prevented.
Alternatively, TT1100-OHP can be directly attached underneath of all the pipework in the area. For small areas a single zone alarm panel is usually adequate as a leak can be spotted quickly, however if there are other areas that need covering, a multi zone alarm or digital system (AT-MZA/ TTDM) would be more appropriate.
![commercial_kitchen_pic2 TT1000 sensing cable](https://www.aquilar.co.uk/wp-content/uploads/2016/09/commercial_kitchen_pic2.jpg)
TT1000 water sensing cable fitted within the raised floor of a MRI room.
![commercial_data_pic1 Overhead suspended pipework protected with TT1000 sensing cable.](https://www.aquilar.co.uk/wp-content/uploads/2016/09/commercial_data_pic1.jpg)
TT1100 attached to overhead water pipes within a ceiling void.
![mri_pic3 MRI scanner room](https://www.aquilar.co.uk/wp-content/uploads/2016/09/mri_pic3.jpg)
TT1000 installed within a drip tray in a ceiling void.